October 16 2019 0Comment

Crucial Points to note for Electric Winch Operators

The concept of electric winches is not new. It dates back to old times, but however, over the years, the usage has been made more potent and easy to use for people. This is an instrument that should be handled very carefully by winch operators. This is because the work that it does is very crucial.

Earlier, what used to happen is such instruments were operated manually. But lately, with technological advancements, motors are being developed and the electric winches run within the motors. The main outlook is to make the operation procedure easier and hassle-free.

Understanding the essential parts of the electric winch by Winch Operators

Before handling an electric winch, the winch operators should have an idea about the necessary parts that he needs to deal with while operating the winch.

  1. Electric Motor

An electric winch and an electric motor are required for each other to work. The modus operandi of an electric motor is like any other random motor, except for the fact that it gains power from electricity. It is vital to ensure that the electric motor’s durability is long. The mettle should be tested before the purchase and thereby it should be used.  Once run within the motors, the winches adjust themselves as per the load.

  1. The sources of power.

Now, as mentioned above, sufficient power is required to learn the electric motor. Naturally, the question arises, from where does the energy come? The mandatory source of energy that is needed is either coming from an AC system or a DC system. The DC systems primarily rely on two different types-

    • Usually powered by a DC system and then directly run with the help of an ATV battery.
    • Run-on approximately DC power tending to a range of 10-15 volts.
  1. The usage of Gear Trains

As mentioned above, Gear Trains are inbuilt in a lot of winches that help in lifting goods that are heavier in size. In advanced winches, elliptical gears are present. The modus operandi that they follow is the same as the planets revolving around the sun in orbit, i.e., solely in a planetary movement.

Other factors about which the Operator should have an idea

There are several other external factors about which the operator should be aware while it comes to operate electric winches. The most critical criteria are listed below-

  1. His eligibility

First and foremost, what the operator should do is be rest assured about the fact that whether he is eligible enough to handle an electric winch or not. As mentioned above, the purpose for which electric winches use makes them all the more “handle with care” instruments. Hence, there are few things that he should check-

    • He should preferably do a certification course on the same and gather a certificate before officially entering the job.
    • He should have a thorough idea regarding the entire machinery and the modus operandi of it. There should not be an ounce of negligence while he is out there to perform the task.
    • He must be aware of the norms concerning the electric winch that he is assigned.
  1. Other miscellaneous points to focus

There are various other miscellaneous aspects regarding handling an electric winch that the winch operators should pay attention to. They should prepare themselves for handling any absurd situation. Say, for example, if the winch endures a problem and thereby stops working. The winch operators should be so well-read regarding this technology that they should be readily prepared to make the due changes and resume working.

Along with that, other aspects like being acquainted with the signals. Which signal allows them to do should be very clear to the operator. Otherwise, carrying out a wrong set of instructions on getting a particular signal can be hazardous to the instrument as well as the work is done.

Other aspects like the parking time and reading meters should also be concentrated. Time and again, the emphasis should be on the proper understanding of the technology involved with electric winches.

How can RMS industries help in supplying electric motors and winches?

We are one of the top exporters of material handling equipment in the country. From the initial times, we did good as much, but with technological advancement, we adapted to the changes well, and now we are the most sought after company from various part of the country that has industrial developments.

We supply electrical equipment like Manual and Electric Hoists, Overhead Cranes, Winches in a large amount. All the industries that require winches can order for their manufactured goods with ease. All our material handling equipments are usually robust, having long durability.

For any winch operator who would like to take up the job of handling electric winches, this article would be beneficial to them.

Leave a Reply