Home / Products / Jib Cranes / Pillar Jib

Jib Cranes · Pillar-Mounted

Pillar-Mounted Jib Cranes

A free-standing jib on a floor-mounted column — needs no wall, carries heavier loads and swings a full 360°. Capacities to ~10 tonnes, structure designed to IS 807.

Capacity up to ~10 tFull 360° slewFree-standingRCC foundationIS 807 structure

Instant Quote Get the Complete Brochure

LOADMATE Pillar / Floor-Mounted Jib Crane

LOADMATE Pillar / Floor-Mounted Jib Crane — view 2

Pillar / Floor-Mounted Jib Crane — in-house manufactured at Surat

~10 tMax SWL

360°Slew

Free-standing

To reqReach

415 V3-ph supply

Hand/ powered slew

Overview

Pillar / Floor-Mounted Jib Crane.

The Pillar (floor-mounted) Jib Crane stands on its own foundation-mounted column, needing no wall, and swings a full 360° — ideal for the centre of a work cell or open floor. It carries heavier loads than a wall jib.

Capacities to ~10 tonnes, with the column and boom designed to IS 807 and set on an RCC foundation. Manual or motorised slew and trolley travel are available.

Technical parameters

Capacity, span & rotation.

Pillar (column) mounted jib crane — freestanding, up to 10 Ton with 360° rotation. Final build confirmed on the project datasheet.

Parameter	Specification
Crane Rotation	Up to 360°
Capacity	Up to 10 Ton
Span	Up to 10 m
Height (floor to underside of boom)	Up to 12 m

Foundation-mounted on a reinforced concrete base. Three boom-support configurations available (bottom-strutted cantilever, top-strutted tie-rod, no-strut).

Technical specifications

Specification sheet.

Standard ranges — send your requirement and we’ll configure to match.

Crane type

Pillar / floor-mounted jib

Safe Working Load

Up to ~10 t

Slew (rotation)

Full 360°

Reach (boom)

To requirement

Lift height

To requirement

Mounting

Free-standing column on RCC foundation

Slewing

Manual (hand) or motorised

Hoist

Electric chain or wire rope hoist on a trolley

Power supply

415 V, 3-phase, 50 Hz

Floor space

Column footprint + foundation

Mechanical & electrical

Boom / jib arm

Rolled I-section or fabricated box, IS:2062 steel

Column / bracket

Fabricated steel column (pillar) or wall bracket, IS:2062

Slew bearing

Sealed turntable / taper-roller, low-friction

Slew range

Up to ~180° (wall) / full 360° (pillar)

Hoist

Electric chain or wire rope hoist on a trolley

Brake

Hoist electromagnetic fail-safe brake

Foundation

Anchor bolts to wall / column (wall) or RCC foundation (pillar)

Finish

Primer + synthetic enamel

Standard features

What comes built in as standard.

Boom & column to IS:2062 structural steel

Low-friction slew bearing (easy hand slew)

Paired with a rated chain / wire-rope hoist

Hoist overload & limit protection

Forged hook with safety latch

Slew stops to protect surroundings

Engineered to your reach, capacity & lift

Designed to IS 807 structural code

Configure your unit

Optional upgrades & add-ons.

Motorised slew & travel

VFD / two-speed hoisting

Radio remote control

Flame-proof (Ex) construction

Outdoor weatherproofing

Wind / slew brakes

Special hooks or vacuum / magnet end-effectors

Higher reach & lift height

Advantages

Why a LOADMATE pillar jib.

Full 360° coverage

A free-standing column swings the boom through a complete circle.

No wall needed

Stands anywhere on the floor — ideal for the centre of a work cell.

Higher capacity

Carries heavier loads than a wall-mounted jib.

Localised, fast lifting

Dedicated coverage of a machine, bench or cell.

Manual or powered

Hand slew on a low-friction bearing, or motorised slew and trolley travel.

Built & tested in-house

Column and boom designed to IS 807; supplied with a rated, tested hoist.

Configurations

Two ways to specify it.

Manual (hand) slew

The boom is swung by hand on a low-friction bearing — simple and economical.

Best for: Lighter loads and occasional positioning.

Motorised slew & travel

Powered slewing and trolley travel for heavier loads and frequent use.

Best for: Higher-duty cells and heavier loads.

Applications

Industries we serve.

Tap any industry for application detail.

Steel & MetalsView industry Engineering & FabricationView industry AutomotiveView industry Cement & ProcessView industry Power & EnergyView industry Warehousing & LogisticsView industry

Standards & compliance

Designed and certified to published standards.

IS 807

Structural design of cranes

The jib structure, boom and column are designed to this standard.

IS 6547 / 3938

Hoist standard

The chain or wire-rope hoist follows its respective IS code.

Slew bearing

Sealed & rated

Low-friction sealed slew bearing rated for the boom moment.

ISO 9001 + ZED

Quality & manufacturing

ISO 9001:2015 certified plus ZED Gold tier.

FAQs

Pillar Jib — technical questions.

What area does a pillar jib cover?

A full 360° circle around its floor-mounted column — ideal for an open floor or the centre of a work cell.

What capacity can you supply?

Up to about 10 tonnes — higher than a wall jib. Send your load, reach and lift for a configured design.

Do I need a foundation?

Yes — the column is set on an RCC foundation sized for the jib loads. We provide the foundation loading data.

Manual or powered slew?

Either — hand slew on a low-friction bearing for lighter use, or motorised slew and trolley travel for heavier, frequent work.

Wall jib or pillar jib?

Wall jib when a wall or column is available and an arc of coverage is enough; pillar jib when there is no wall, loads are heavier, or full 360° reach is needed.

Which standards apply?

The structure is designed to IS 807; the hoist follows its IS code. ISO 9001:2015 and ZED Gold certified.

Need a Pillar Jib quote?

Send your requirement and our application engineers respond within 24 hours with a configuration, spec sheet and quote.