Home / Industries / Power & Energy

Industries · Power Generation

Turbine-hall cranes that shorten every outage.

In a power plant, the crane that lifts the turbine rotor decides how long the unit stays offline. LOADMATE supplies heavy double-girder EOT cranes with precise micro-speed and maintenance hoists for turbine halls, boilers and switchyards.

Request a quote See All Cranes & Hoists
LOADMATE cranes and hoists for Power & Energy
Power & Energy — cranes & hoists engineered for your plant
Up to ~100 tTurbine-hall duty
VFDMicro-speed laydown
Main + auxHoist options
Pan-IndiaService & spares
We know your plant

Power & Energy, area by area.

Power generation is a story of uptime. The turbine-hall crane spends most of its life idle — then, during an overhaul, it performs the single most critical lift in the plant: lowering a multi-tonne rotor onto its bearings with millimetre control. Every hour that lift is delayed is generation lost.

LOADMATE engineers turbine-hall cranes for exactly that moment: heavy double-girder structures, main and auxiliary hoists, VFD micro-speed for rotor laydown, and the duty class to handle decades of maintenance cycles — plus the hoists and gantries for boiler, balance-of-plant and switchyard work.

Where we lift

Walk the plant — click any area.

Each area has its own loads, its own hazards, and its own way of testing a crane. Tap a stage to jump to it.

LOADMATE Turbine hall Rotor, stator & casings

The lift that ends the outage

The turbine-generator is assembled and overhauled here. Lowering the rotor and stator demands heavy capacity and the finest possible micro-speed — this lift sets the plant’s return-to-service date.

  • What hangs from the hookTurbine rotor, generator stator, casings, condenser parts.
  • When the crane failsEvery hour the rotor lift is delayed is lost generation revenue.
  • The LOADMATE answerDouble-girder EOT cranes with main + auxiliary hoist and VFD micro-speed for precise rotor laydown.
LOADMATE Boiler / HRSG Tubes, drums & burners

High-bay maintenance

Boiler and HRSG maintenance means lifting tube bundles, drums, burners and soot-blowers in tall, hot structures — reliable high-lift handling over critical equipment.

  • What hangs from the hookTube bundles, steam drums, burners, economisers.
  • When the crane failsA boiler crane failure stalls the outage critical path.
  • The LOADMATE answerEOT cranes and wire rope hoists with high lift heights and heat-aware build.
LOADMATE Balance of plant Pumps, fans & valves

Everyday overhaul duty

Feed pumps, FD/ID fans, mills, motors and large valves across the plant need regular pulling and re-installation — steady, dependable maintenance lifting.

  • What hangs from the hookBoiler feed pumps, fans, mills, motors, valves.
  • When the crane failsUnplanned BOP failures force derates and forced outages.
  • The LOADMATE answerWire rope hoists and EOT cranes sized to the heaviest removable component.
LOADMATE Switchyard & transformer Transformers & breakers

Outdoor heavy lifting

Transformers, reactors and breakers are heavy, outdoor and high-value. Handling them for installation or replacement calls for weatherised, rail-mounted lifting.

  • What hangs from the hookPower transformers, reactors, circuit breakers.
  • When the crane failsA transformer handling delay can keep a unit off the grid.
  • The LOADMATE answerGoliath / gantry cranes with weatherised electricals for outdoor transformer bays.
Recommended equipment

The right lift for Power & Energy.

LOADMATE Double Girder EOT Cranes

Double Girder EOT Cranes

Heavy capacity, main + auxiliary hoist and VFD micro-speed for turbine-rotor laydown.

Explore
LOADMATE Goliath Cranes

Goliath Cranes

Outdoor, weatherised handling of transformers and switchyard equipment.

Explore
LOADMATE Electric Wire Rope Hoists

Electric Wire Rope Hoists

Boiler and balance-of-plant maintenance lifting at height.

Explore
Applications

Where it runs.

Thermal power — coal, gas and combined-cycle turbine halls.
Hydro & pumped storage — generator and gate handling.
Nuclear conventional island — turbine and BOP maintenance.
Substations & transmission — transformer handling.
Why LOADMATE

Built to last where it matters.

Engineered, not catalogued

Every crane is designed to your bay, loads, duty class and environment — not pulled off a shelf.

Built & tested in-house

Design, fabrication, hoist, wiring, paint and a 125% load test, all under one roof at Surat.

IS-code & ZED certified

IS 3177 / 807 / 4137 / 3938 / 6547, ISO 9001:2015 and Government of India ZED Gold.

Pan-India service

Erection, commissioning, spares and a responsive service team across India and 30+ export markets.

FAQs

Power & Energy — common questions.

What capacity do you supply for a turbine hall?

Heavy double-girder EOT cranes sized to your heaviest single lift — commonly up to ~100 t, with an auxiliary hoist for lighter, faster handling.

Can you provide micro-speed for rotor laydown?

Yes — VFD stepless hoisting gives fine, repeatable micro-speed for precise rotor and stator placement onto bearings.

Why a main and auxiliary hoist?

The main hoist handles the heaviest lifts; the auxiliary handles lighter components faster, so the crane suits both the rotor lift and routine overhaul work.

Do you handle outdoor transformer lifting?

Yes — goliath / gantry cranes with weatherised paint and IP-rated electricals for switchyard and transformer bays.

Which standards apply?

IS 3177 and IS 807 for cranes, IS 3938 for wire rope hoists, with ISO 9001:2015 and ZED Gold certification, and a 125% load test.

Planning a lift for your power & energy plant?

Send your loads, span, duty cycle and environment. Our application engineers respond within 24 hours with a configuration, spec sheet and quote.

Request a quote See All Cranes & Hoists
Choose by role

Find the answers that matter to your role.

Owner, procurement, production, maintenance or consultant — what you need from a crane depends on your seat. Pick yours and we’ll take you straight to it.